• page_banner

Wear rings NYLON FIBER GLASS phenolic resin copper powder PTFE

Wear rings NYLON FIBER GLASS phenolic resin copper powder PTFE

Short Description:

NINBO BODI SEALS  for hydraulic cylinders Sealing Solutions proprietary design of hydraulic wear ring or guide ring. The function of a hydraulic wear ring is to guide the piston and piston rod of a hydraulic cylinder, absorbing transverse forces. At the same time, it prevents metal-to-metal contact, optimizing the performance of the sealing system. Sealing Solutions proprietary design of hydraulic wear ring or guide ring. The function of a hydraulic wear ring is to guide the piston and piston rod of a hydraulic cylinder, absorbing transverse forces. At the same time, it prevents metal-to-metal contact, optimizing the performance of the sealing system. BD SEALS  hydraulic wear rings and guide rings are available in three different materials types all of which are wear-resistant and demonstrate outstanding friction properties.


Product Detail

Product Tags

PRODUCT DESCRIPTION

● BD SEALS  is for low to medium duty applications where there are limited radial forces, is for medium to heavy duty applications and BD SEALS materials are for heavy duty applications where there are high radial forces. The function of a wear ring, wear band or guide ring is to absorb the side load forces of the rod and/or the piston and to prevent metal-to-metal contact that would otherwise damage and score the sliding surfaces and eventually cause seal damage, leakage and component failure. Wear rings should last longer than the seals as they are the only thing stopping expensive damage to the cylinder.Our non-metallic wear rings for rod and piston applications offer great benefits over traditional metal guides:

● High load bearing capabilities

● Cost effective

● Easy installation and replacement

● Wear-resistant and long service life

● Low friction

● Wiping/cleaning effect

● Embedding of foreign particles possible

● Damping of mechanical vibrations

● Typical Application

● Linear, reciprocating dynamic applications

Operating Range

● Surface Speed: up to 13ft/s (4m/s) depending on material

● Temperature: -40°F to 400°F (-40°C to 210°C) depending on material

● Materials: Nylon, POM, filled PTFE (bronze, carbon-graphite, glass fiber)


  • Previous:
  • Next:

  • Write your message here and send it to us